Restoration Gallery - 26/6/10
Restoration Gallery

26/6/10


Mick, Mick and David put the crank case cover back on power unit 439
Photo by James Whincup


Pete and Keith inspect the generator
Photo by James Whincup


Graham and Mike remove the axle box covers, locking rings and end caps and remove any dirty grease
Photo by James Whincup


Libby giving the end caps and bolts a thorough clean
Photo by James Whincup


The before (right) and after (left) cleaning of the scavenge blower oil strainers for D9009
Photo by James Whincup


Charlie and Tom continue the electrical checks and component removal for testing and overhaul
Photo by James Whincup


Conduit piping for Tulyar engine room lights is painted in undercoat
Photo by James Whincup

27/6/10


The axle box with removed end caps
Photo by Mike Hallam-Rudd


Graham Werritt from SERCO doing Ultra Sonic testing on the axle
Photo by Mike Hallam-Rudd


Graham Werritt from SERCO doing Ultra Sonic testing on the Equalising Beam
Photo by Mike Hallam-Rudd


Inside the axle box after testing with new Tab Plates fitted ready for tightening and the tabs forming over to lock the bolt heads
Photo by Mike Hallam-Rudd

Restoration 5/6/10 or Restoration 28/8/10

Main Gallery Viewing Area